Do You Want To Enhance The Fuel Efficiency Of Your Vehicle? Choose The Best Fuel Injector Cleaner For It!
A Fuel Injector is a very small nozzle like object with tiny holes that act as pressurized chambers to atomize the fuel into the engine of your vehicle or your machine for a more efficient use of your fuel. However, the fuels that we use are full of impurities and dirt. These over time collect in the holes and due to the heat from the engines and end up blocking the holes. This reduces the fuel efficiency of the vehicle besides causing other problems like hard starting, stalling, etc.
The best way to prevent these issues is to use a good quality Fuel Injector Cleaner. Click here to see our #1 pick on Amazon. These are chemicals which when added to your fuel in a specific ratio, removes these deposits. Some premium cleaners have additives which also clean intake valves and combustion chamber. Let us look at the 10 best Fuel Injector Cleaners on the market today:
How To Select The Best Fuel Injector Cleaner
A fuel injector is used in cars which were made after the 1990’s; the earlier cars used carburetors. So check the year and make of your car and check if you have a fuel injection system before buying a cleaner.
The active ingredients which help remove the deposits are chemicals known as Polyisobutene(PIB), Polyisobutylene Amine (PIBA) or Polyetheramine (PEA), with PEA being the most effective.
There is a wide range of products available as is evident from the reviews above. It is a wise idea to go through the product details and select the best fuel injector cleaner which suits both your pocket and your car.
Comparison Table of Top 10
Image | Model | Rating | Price |
 | Sta-Bil 22207-12PK Fuel Stabilizer | 9.6 / 10 | $$$ |
 | STA-BIL 22275 360 Performance with Vapor Technology | 9.3 / 10 | $ |
 | Hot Shot’s Secret P040464Z Diesel Extreme Clean and Boost | 8.2 / 10 | $$ |
 | Lucas 10013 Fuel Treatment | 9.4 / 10 | $$ |
 | Red Line 60103 Complete SI-1 Fuel System Cleaner | 9.0 / 10 | $ |
 | BG 44k Fuel System Cleaner | 9.4 / 10 | $$$ |
 | Chevron 67740-CASE Techron Concentrate Plus Fuel System Cleaner | 9.1 / 10 | $$ |
 | Power Service 03080-06 +Cetane Boost Diesel Kleen Fuel Additive | 9.2 / 10 | $ |
 | Sea Foam SF128 Motor Treatment | 8.4 / 10 | $$$ |
 | 24 FPPF Fuel Power Diesel Fuel Treatment | 9.6 / 10 | $$$$ |
Top 10 Best Fuel Injector Cleaner Reviews:
#1 – Sta-Bil 22207-12PK Fuel Stabilizer Review
Sta-Bil 22207-12PK Fuel Stabilizer – 16 oz., (Case of 12)
The Sta-Bil 22207-12PK Fuel Stabilizer is meant for cars and machines which use gasoline including ethanol blended gasoline (up to E-85) for fuel. It can be used for both the 2 & the 4 cycle engine machines. It comes in an easy to use and quick measure bottle.
The Sta-Bil 22207-12PK cleans the fuel injector, protects the engine from gum and varnish and also removes water which can cause corrosion and rusting of the engine. The recommended usage is 1 ounce of the stabilizer to 2½ gallons of fuel.
The Sta-Bil 22207-12PK is a fuel stabilizer which means that it maintains the integrity of the fuel and keeps its fresh even when it is stored in the machines for more than 30 days and up to 12 months. This eliminates the need for you to drain the fuel from your machines like your land mower in between uses. Without the use of the stabilizer, gum and varnish builds up in the engine and you will have difficulty in starting it.
For current price of Sta-Bil 22207-12PK click here
#2 – STA-BIL 22275 360 Performance with Vapor Technology Review
STA-BIL 22275 360 Performance with Vapor Technology, 32 Fl. oz
The STA-BIL 22275 360 is manufactured by a Chicago-based company, Gold Eagle Co. which has been a pioneer in and an innovator of aftermarket fluids & additives and branded engine performance & maintenance chemicals for over 75 years.
A product of this innovation, the STA-BIL 22275 360 is the only fuel treatment which uses a revolutionary technology to emit a vapor which ascends above the fuel line to treat the engine including the entire fuel system and the combustion chamber, with a protective coating on all metal parts which reduces corrosion caused by moisture even in places where other fuel treatments cannot reach. This is especially essential for machines which use ethanol blended gasoline. It cleans carbon build-up, gum and varnish from more of the engine’s surface. It also clears and prevents gum and varnish throughout the combustion chamber and injectors.
The recommended usage is 1 ounce for 5 gallons of fuel. It can be used with both 2 & 4 cycle engines which use gasoline as fuel including gasoline which is ethanol blended.
For more information about the STA-BIL 22275 360 click here
#3 – Hot Shot’s Secret P040464Z Diesel Extreme Clean and Boost Review – The Best Diesel Injector Cleaner
Hot Shot’s Secret P040464Z Diesel Extreme Clean and Boost – 64 fl. oz.
The Hot Shot’s Secret P040464Z is meant to be used with machines and cars which use engines that are fueled by diesel. It contains chemicals and additives which not only help clean out even the diesel tank, the line and the injectors to the engine but also help lubricate the fuel pump and injectors thereby increasing their performance, efficiency and life.
It also removes free water due to moisture build-up in the system and then coats the tank and the lines with a chemical inhibitor which reduces corrosion and rusting of the engines and other metal components of the fuel injection system. The recommended dosage is about 1 ounce of the additive to 2½ gallons of the fuel.
More importantly the Hot Shot’s Secret P040464Z is a concentrated cetane improviser which maintains the quality of fuel during storage and helps reduce the need for draining the fuel from machines during periods of non-use. This also helps increase the power and performance of diesel engines for higher mileage and better economy of maintenance.
Click here to see the full features of Hot Shot’s Secret cleaner
#4 – Lucas 10013 Fuel Treatment Review – The Best Lucas Fuel Injector Cleaners
Lucas 10013 Fuel Treatment – 1 Gallon
The Lucas 10013 Fuel Treatment is one of the few additives which work with both gasoline and diesel engines. In fact, it works with non-road, locomotive and marine engines too. The recommended usage is 2-3 ounces per 10 gallons of fuel.
It is a combination of super-slick oils and high detergent action additives which clean and lubricates the injection system and the pumps as it flows through the system. It also breaks up the deposits in the fuel injection system. This helps get rid of any pre-ignition problems that your engines may have.
It improves the gasoline octane rating by replacing polymers lost in the fuel and increases the power and fuel efficiency of your engines while reducing emissions. It can also be used in engines which use leaded gasoline, as it replaces the benefits of leaded fuel with no negative side effects. It also reduces the problems you may have due to low sulfur content in your fuel.
It is also the best-priced product for the budget minded.
Click here to buy at amazon.com
#5 – Red Line 60103 Complete SI-1 Fuel System Cleaner Review – The Best Red Line Fuel Injector Cleaners
Red Line (60103) Complete SI-1 Fuel System Cleaner – 15 Ounce
The Red Line 60103 is one of the strongest cleaners in the market as it has the highest concentration of Polyetheramine (PEA) which has proven to be a more effective cleaner than any other chemicals. You also need to use very little for a good scrub. The recommended dosage is less than 3 ounces for an average fuel tank size of 12 -13 gallons, which makes this one of the cheapest cleaners per usage in the market today. It can be used only with gasoline fueled engines.
It not only cleans the fuel injection system but also removes carbon deposits from carburetors, valves and the combustion chamber. It also reduces the need for octane by up to 2 points. This increases the efficiency and power of your engine.
However, it is not rated much higher by consumers as it does not have the lubricating capabilities of other additives.
The bottle design is also inconvenient; you will need to use a funnel. It is also one of the cheapest fuel injection cleaners in the market today.
For the current price of the Red Line 60103 click here
#6 – BG 44k Fuel System Cleaner Review
3 Pack Bg 44k Fuel System Cleaner w/ Bg Funnel – 3 Cans
The BG 44k Fuel System Cleaner is one of the most expensive fuel injection cleaners per ounce of the liquid. But the 11 ounce can have an additive which is made of high-quality detergents and additives that this cleaner has so much power that you need to use less than other cleaners for the same effect. The manufacturers, in fact, claim that you need just one can to clean your entire engine and fuel system with a fuel capacity of up to 20 gallons.
This is meant to be used only with gasoline-fueled engines including ethanol blended gasoline-fueled engines. It quickly cleans not just the injection system but also the valves, ports and the combustion chamber especially the pistons, which many of the cheaper alternatives do not. Moreover, it cleans the deposits from the upper engine area which increases the power you can get from your engines. It also reduces the other engine problems caused by these deposits like stalling and stumbling of the engine.
Read what customers say about the Bg 44k Fuel System Cleaner
#7 – Chevron 67740-CASE Techron Concentrate Plus Fuel System Cleaner Review
Chevron 67740-CASE Techron Concentrate Plus Fuel System Cleaner – 12 oz., (Pack of 6)
The Chevron 67740-CASE Techron Concentrate Plus Fuel System Cleaner is considered to be the best budget fuel injection cleaner. Since the takeover by Chevron, the quality of the product has improved considerably.
It contains a patented Polyether Amine (PEA) blend. PEA is one of the strongest cleaners. It removes sulfur deposits from the injection system and the engine (valves and pistons) which helps improve performance and efficiency of the car’s engine. It is especially useful in those engines with fuel gauge sensors as it cleans these too and helps improve the quality of fuel being used in your engine. It is compatible with all gasoline-fueled engines including ones fueled by ethanol blended gasoline.
It has special additives which improve the injection quality and so gets rid of rough idle. Many users also claim that regular usage increases mileage by about 10% for any engine. It also improves fuel stability up to one year.
However, the cleaning strength also comes with a downside; use of more than the recommended dosage deteriorates plastic in the fuel line.
To see the current price of Chevron 67740-CASE Techron Concentrate Plus click here
#8 – Power Service 03080-06 +Cetane Boost Diesel Kleen Fuel Additive Review – The Best Diesel Fuel Additives
Power Service 03080-06 +Cetane Boost Diesel Kleen Fuel Additive – 80 oz.
The Power Service 03080-06 is meant to be used for diesel-powered engines. It can be used with all types of diesel including ultra-low sulfur diesel, biodiesel and biodiesel blends. It can also be used in High-Pressure Common Rail systems.
It not only cleans the injection system but also prevents the injectors from sticking. It has a Centane boosting formulation which raises the cetane levels a full 6 points. The manufacturers claim that this additive also raises the fuel efficiency of your diesel engine up to 8%. The Power Service 03080-06 also contains a special blend of oils which lubricates the pumps and injectors and increases their life as the wear and tear reduces. All these features have ensured that the Power Service 03080-06 is consistently rated higher with customers and placed in the top 5 diesel engine additives by most reviewers.
Click here to see what customers say about it
#9 – Sea Foam SF128 Motor Treatment Review – The Best Sea Foam Fuel Injector Cleaners
Sea Foam SF128 Motor Treatment, 1 gallon
One of the most well-known brands which have been around for more than 70 years, the Sea Foam SF128 is an extremely versatile additive. It can be used with both diesel and gasoline-fueled engines and for both carburetor and fuel injection engines. The recommended dosage, when used as a fuel additive, is 1 ounce per gallon of fuel, as a stabilizer is 1.5 ounce to 1 gallon.
It acts not only as a cleaner but also as a lubricator, fuel stabilizer and moisture controller. It is not the strongest cleaner in the market; however, it cleans the injectors, passageways, intake valves and the pistons and improves their efficiency and life. It stabilizes the fuel for up to 2 years. It reduces the moisture content in the system and reduces corrosion in the engine and fuel system. It also works as a de-icer and anti-gel.
Though it is relatively expensive in per ounce terms as compared with some of the other products, its versatility gives it a great value for the money you spend.
Click here to see the current price of Sea Foam SF128
#10 – 24 FPPF Fuel Power Diesel Fuel Treatment #90100 Review
24 FPPF Fuel Power Diesel Fuel Treatment #90100
The 24 FPPF Fuel Power Diesel Fuel Treatment #90100 is meant to be used with diesel-fueled engines including ones with biodiesel blend.
This contains a concentrated formula; the 8-ounce bottle can treat up to 240 gallons of diesel fuel. Its powerful ingredients clean the fuel injection system and help improve the fuel efficiency of your diesel engine. It also controls waxing and gelling of the fuel in the engine system. It also contains additives which control the moisture content in the fuel which can corrode the injection and engine system.
It also has a combustion catalyst which improves the fuel efficiency and improves the fuel economy of your cars and machines. It acts as a fuel stabilizer which increases the life of the diesel even when it is stored in the machines.
It also acts as a lubricant and reduces the wear and tear of the moving parts in the engine, thereby increasing the life of your car.
Additionally, it is the cheapest per ounce diesel fuel injection cleaner.
Check current of 24 FPPF Fuel Power Diesel Fuel Treatment
